The HI-PE Multi Zone is a high performance walk-through Metal Detector which exceeds all International Secuirty Standards. A “height on person” display actually indicate, by means of illuminated LED’s, the position of the weapn on the person.

Three operating modes are available: Floating (standard), the location zones are not fixed, as in the case of metal detetors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution; 8-ZONES and 4-ZONES, the alarm threshold can be adjusted individually for each zone. The panels are washable and they are equipped with shock absorbent edges to protect them against damages.

The HI-PE Multi Zone allows a high level of discrimination betwen significant metal masses,  such as the weapons which are to be detected, and personal metal effects in common use; extremely high levels of immunity to external interference, making it easy to use even when external electrical noise is encountered.  Furthermore, the sensitivity is independent of the transit speed.

The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.

The HI-PE Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures

Immediate selection of International Security Standards.
Detection of magnetic, non-magnetic and mixed alloys metal weapons. All functions programmable and controlled by a microprocessor
Programming
Via built-in keypad and display or RS-232 serial connection to Remote Control Unit (RCU2), a PC or a computer network
Programmking access protected by both a mechanical lock and two alphanumeric passwords
Transit Flow
Extremely quick reset time for a rapid flow-rate; detection speed up to 15 m/s (145 ft/s)
Exceptional immunity to electromagnetic and mechanical interference
Multiple Installations
Automatic synchronisation between two or more metal detectors with a reciprocal distance of down to 5 cm (2”) without the use of cables
Professional high integration and high reliability electronics
Control Unit
Incorporated into the detector
No. Initial or periodic calibration
Easy Maintenance : Modular control unit for a rapid replacement
Colour : Light grey RAL 7040

Power Supply	:	115/230 VAC, +10/-15% , 50 60 Hz, 40 VA max
External Interface	:	RS-232C for connection to a Remote Control Unit (RCU2),                             a terminal, a computer, an external modem or other CEIA Metal Detector
Protection	:	Indoor Model : Ip20- IEC 529
Degree	:	Outdoor Model : Ip65 -= IEC529
Operating Temperature	:	-20°C TO + 70°C
Storage Temperture	:	-35°C to +70°C
Relative Humidity	:	0 to 95%  (without condensation)

Harmless to wearers of pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar).
Conforms to the current International Security Standards for Walk-Through Metal Detectors.
Complies with EC Regulations and International Standards relating to Electrical Safety and Electromagnetic Compatibility (EMC).

Visible Signals
Multi-zone display bar for “height on person” localisation.
High intensity display.
Green and red metering signals proportional to the mass of the object detected.
Audible Signals
High acoustic intensity alarm signal.
Volume and tone of alarm signal can be programmed.