Products
- Explosive Detector
- Non Linear Junction Detector
- Multi Zone Metal Detector
- Hand Held Metal Detector
- Deep Search Metal/Mine Detector
- Digital Portable X-ray Machine
- X-ray Baggage Inspection System X-BIS
- Letter Bomb Detector
- Night Hawk
- Hand Held Search Light
- Datachable Hand Held Search Light
- Walk Through Metal Detector
- Electronic Stethoscope
- Bomb Suppression Blanket
- Bomb Trolly
- Bomb Basket
- Visual Detection Kit
- Under Vehicle Search Mirror
- Telescopic Extension Mirror
- Survelliance Periscope Mirror
- BDDS Kits
Detachable Hand Held Search Light (Model-KY-HANDY)
The detachable search light is similar to search light/dragon light. The head lamp called
as spot light is separated from the battery and electronic circuit container. The spot light
is connected to the battery and electronic circuit container through flexible wire.
Spot light is having 55 watt halogen bulb fitted in deep parabolic reflector backed by rechargeable SMF lead acid 12 volts 7amp battery. Ten meter connecting lead is provided with the spot light. Male plug-in-connector is provided with the lead. Push to ON-OFF switch is provided on the handle of the spot light.
as spot light is separated from the battery and electronic circuit container. The spot light
is connected to the battery and electronic circuit container through flexible wire.
Spot light is having 55 watt halogen bulb fitted in deep parabolic reflector backed by rechargeable SMF lead acid 12 volts 7amp battery. Ten meter connecting lead is provided with the spot light. Male plug-in-connector is provided with the lead. Push to ON-OFF switch is provided on the handle of the spot light.
Click Image to Enlarge
WIRE ASSEMBLY FOR EXTERNAL BATTERY
1. Three meter wire is provided for connecting spotlight to work through any 12 volts external battery.
2. On the one corner, interchangeable battery clamps are provided and on the other corner, female plug-in-socket is provided to the wire.
INBUILT SMPS BATTERY CHARGER
Battery charger works on 220 volts 50 Hz supply. Autocut off circuit is provided to avoid overcharging of the battery.
Lead with 3 pin male charging connector is provided to connect the same with 3 pin female charging socket provided in battery container.
AC and DC fuse holders are provided to indicate fuse due to AC and DC failure respectively.
USE OF SPOT LIGHT THROUGH 12 VOLTS EXTERNAL BATTERY
1. Connect male plug-in-connector of the spot light to the female plug-in-socket of the wire assembly.
2. Connect interchangeable battery clamps to any external battery source.
BATTERY AND ELECTRONIC CIRCUIT CONTAINER
1. Contains 12 Volts 7 Amph SMF battery
2. Four position switch-timer, flasher, continuous and Dimmer modes.
3. Push to On switch
4. Female plug-in-socket
5. 3 pin female charging socket
6. Auto Flashing
7. Variable Timmer Switch
OPTIONAL
1. Focus Adjustment
2. Wireless Remote Switch
3. Wired Remote Switch
(10 mtr., 50 mtr., 100 mtr.)
INFRA RED COLLER
The Night Vision Device becomes uneffective when used in the absence of moon/starlight and while using during cloudy nights, undertrees, inside trucks, etc. Thus, Night Vision Device requires some Infra Red source of light.
Infra Red Coller is when attached to the Search Light/Spot Light/Detachable Search Light, turns into Non-Visible Infra Red source of light for Night Vision Device.
1. Three meter wire is provided for connecting spotlight to work through any 12 volts external battery.
2. On the one corner, interchangeable battery clamps are provided and on the other corner, female plug-in-socket is provided to the wire.
INBUILT SMPS BATTERY CHARGER
Battery charger works on 220 volts 50 Hz supply. Autocut off circuit is provided to avoid overcharging of the battery.
Lead with 3 pin male charging connector is provided to connect the same with 3 pin female charging socket provided in battery container.
AC and DC fuse holders are provided to indicate fuse due to AC and DC failure respectively.
USE OF SPOT LIGHT THROUGH 12 VOLTS EXTERNAL BATTERY
1. Connect male plug-in-connector of the spot light to the female plug-in-socket of the wire assembly.
2. Connect interchangeable battery clamps to any external battery source.
BATTERY AND ELECTRONIC CIRCUIT CONTAINER
1. Contains 12 Volts 7 Amph SMF battery
2. Four position switch-timer, flasher, continuous and Dimmer modes.
3. Push to On switch
4. Female plug-in-socket
5. 3 pin female charging socket
6. Auto Flashing
7. Variable Timmer Switch
OPTIONAL
1. Focus Adjustment
2. Wireless Remote Switch
3. Wired Remote Switch
(10 mtr., 50 mtr., 100 mtr.)
INFRA RED COLLER
The Night Vision Device becomes uneffective when used in the absence of moon/starlight and while using during cloudy nights, undertrees, inside trucks, etc. Thus, Night Vision Device requires some Infra Red source of light.
Infra Red Coller is when attached to the Search Light/Spot Light/Detachable Search Light, turns into Non-Visible Infra Red source of light for Night Vision Device.
